Top 100 Gadget Blogs
The Top 100 Gadget Blogs ranking is here to help you find out which of the gadget blogs from around the world are the ones to watch out for. Ranking is based on information from Alexa and Technorati which combined, give the blog a ranking. The lower the rank number, the higher in the top 100 gadget blogs list the particular blog will appear.
Information for the Top 100 Gadget Blogs list is compiled every week. At the bottom of the top 100 list you will find code to add a top 100 blog button to your gadget blog.
Congratulations to all those who made the Top 100. If you own a gadget blog and are not listed then drop us an email and we will add it for you.
Updated 20th June 2009
Rank
Blog
Alexa
Technorati
www.engadget.com
www.gizmodo.com
www.switched.com/
www.crunchgear.com/
www.ubergizmo.com/
www.slashgear.com/
www.techeblog.com
www.yankodesign.com/
www.coolest-gadgets.com
www.akihabaranews.com/
www.likecool.com/
inventorspot.com
www.i4u.com/
www.slipperybrick.com/
www.technabob.com
www.techfresh.net/
www.geeksugar.com/
www.geeky-gadgets.com/
www.bornrich.org
www.ohgizmo.com/
www.gearlive.com/
www.walyou.com/blog
hackedgadgets.com/
www.redferret.net/
www.gearlog.com/
www.everythingusb.com/
www.geekalerts.com
www.gadgetvenue.com
nexus404.com/Blog/
www.shinyshiny.tv/
www.gadgetell.com/
www.uberreview.com/
www.gizmowatch.com/
www.nerdapproved.com
www.gearcrave.com
www.techchee.com/
craziestgadgets.com/
www.gadgets-reviews.com/
www.teknobites.com/
www.gaj-it.com
www.7gadgets.com/
www.geekandhype.com/
www.gadgettastic.com
gadgets.fosfor.se
www.trendygadget.com/
www.rimarkable.com/
www.zath.co.uk
www.phonearea.net/
www.ounae.com/
www.gizmosforgeeks.com/
blog.pcnews.ro/
www.coated.com
www.digitalworldtokyo.com/
www.elitezoom.com/
www.techlivez.com/
www.dailydigitals.com/
blog.wired.com/gadgets/
www.gadgetspy.co.uk/
www.gadgetmadness.com/
www.funponsel.com/blog/
www.cutiegadget.com/
todaygadgets.com/
www.techiediva.com/
www.thinktechno.com/
www.audiojunkies.com/
www.gadgets-club.com/
www.gadgetizer.com
www.gopaultech.com/
www.desinformado.com/
thegadgetsite.blogspot.com/
blog.mightygadget.co.uk/
www.lifeatmost.com/
gadgets.infoniac.com/
www.realitywired.com/
www.gadgetspage.com/
www.gadgetsonthego.net/
www.loopygadgets.com/
www.spyreview.co.uk/
www.gadgetsandgizmos.org
www.mobileincanada.com/
www.machinesthatgobing.com/
www.giz4geeks.com
www.gizmo-central.com/
www.gadget-blog.co.uk/
www.idealgadget.com/
www.techzi.net/
dasyndicate.sweell.com/
www.teckh.com/
www.ladiesgadgets.com/
www.gizmograph.com/
rj3sp.blogspot.com/
www.freshpilot.com/
www.gadgetsblog.org/
www.gadgets-network.com/
themensgiftguide.com/
www.technonix.com/
www.mybestgadgets.com/
www.thegadgetblog.com/
Sabtu, 26 Februari 2011
instalasi windows xp 2
1. Sebelumnya kamu membutuhkan CD master Windows XP terlebih dahulu kemudian masukan di CDROM/DVDROM kamu. Lalu restart komputer kamu, kemudian nampak tampilan seperti gambar lalu tekan tombol Delete pada keybord agar kamu dapat masuk di BIOS(Basic Input Output System) komputer. Pada beberapa jenis Mainboard harus menekan tombol F2 pada keyboard. Kamu dapat melihatnya pada perintah Press DEL to run Setup.
2. Lalu kamu akan berada dalam BIOS kemudian pilih Boot pada menu dan pilih item Boot Device Priority seperti pada gambar.
3. Setelah itu Kamu merubah [CDROM] pada posisi 1st Boot Device untuk boot melalui CDROM dengan menggunakan tombol +- di keyboard.Lalu tekan F10 untuk menyimpan konfigurasi kamu.
4. Restart komputer tunggu hingga muncul tulisan seperti pada gambar lalu tekan sembarang tombol dengan cepat.
5. Setelah pada tampilan berikut tekan Enter untuk lanjut pada proses instal atau R untuk melakukan reparasi Windows di Recovery Consule atau F3 untuk mengakhiri proses instal.
6. Lanjut pada Lisencing Agreement tekan F8 untuk lanjut dan ESC untuk batalkan proses.
7. Pada gambar posisi partisi belum terisi oleh sistem windows.Tekan C untuk membuat partisi baru pada harddisk dan Enter untuk menginstal.
8. Lalu masukan berapa besar kapasitas partisi yang ingin kamu buat dalam satuan megabytes(MB) dan tekan Enter untuk membuat partisinya seperti terlihat pada gambar.
9. Kemudian tekan Enter untuk melakukan proses instal atau Delete untuk menghapus partisi.
10. Dan pilih NTFS file system (Quick) atau FAT file system (Quick) lalu tekan Enter.
11. Bila proses instalasi langkah 1 → 10 benar maka akan tampil seperti gambar.
12. Setelah itu kamu sampai pada layar berikut Click Next.
13. Lalu isikan dengan Nama dan Organisasi Kamu kemudian tekan Next.
14. Disini Kamu akan mengisikan Produk Key atau Serial Number dari type windows Kamu tekan Next lagi.
15. Isikan nama komputer dan password untuk mengaksesnya lalu tekan Next.
16.
Set Time Zone pada posisi (GMT+80:00) klik Next.
17. Typical settings: Pada option ini settingan jaringan akan dibuat default windows dan Custom settings: Untuk mensetting jaringan kamu secara manual lalu klik Next.
18. Bila Kamu terhubung kejaringan local dengan domain pilih option Yes, lalu isi dengan nama DOMAIN yang sama dengan DOMAIN jaringan Kamu dan sebaliknya jika tidak terhubung kejaringan atau terhubung tapi tanpa DOMAIN pilih option No, sekali lagi tekan Next.
19. Selanjutnya Kamutinggal mengklik Ok,Next,Skip dan Finish juga diminta mengisikan nama kamu. hingga Kamu berada pada tampilan Dekstop Windows seperti ini. Sekarang Kamu tinggal menginstal driver hardware CPU Kamu.
2. Lalu kamu akan berada dalam BIOS kemudian pilih Boot pada menu dan pilih item Boot Device Priority seperti pada gambar.
3. Setelah itu Kamu merubah [CDROM] pada posisi 1st Boot Device untuk boot melalui CDROM dengan menggunakan tombol +- di keyboard.Lalu tekan F10 untuk menyimpan konfigurasi kamu.
4. Restart komputer tunggu hingga muncul tulisan seperti pada gambar lalu tekan sembarang tombol dengan cepat.
5. Setelah pada tampilan berikut tekan Enter untuk lanjut pada proses instal atau R untuk melakukan reparasi Windows di Recovery Consule atau F3 untuk mengakhiri proses instal.
6. Lanjut pada Lisencing Agreement tekan F8 untuk lanjut dan ESC untuk batalkan proses.
7. Pada gambar posisi partisi belum terisi oleh sistem windows.Tekan C untuk membuat partisi baru pada harddisk dan Enter untuk menginstal.
8. Lalu masukan berapa besar kapasitas partisi yang ingin kamu buat dalam satuan megabytes(MB) dan tekan Enter untuk membuat partisinya seperti terlihat pada gambar.
9. Kemudian tekan Enter untuk melakukan proses instal atau Delete untuk menghapus partisi.
10. Dan pilih NTFS file system (Quick) atau FAT file system (Quick) lalu tekan Enter.
11. Bila proses instalasi langkah 1 → 10 benar maka akan tampil seperti gambar.
12. Setelah itu kamu sampai pada layar berikut Click Next.
13. Lalu isikan dengan Nama dan Organisasi Kamu kemudian tekan Next.
14. Disini Kamu akan mengisikan Produk Key atau Serial Number dari type windows Kamu tekan Next lagi.
15. Isikan nama komputer dan password untuk mengaksesnya lalu tekan Next.
16.
Set Time Zone pada posisi (GMT+80:00) klik Next.
17. Typical settings: Pada option ini settingan jaringan akan dibuat default windows dan Custom settings: Untuk mensetting jaringan kamu secara manual lalu klik Next.
18. Bila Kamu terhubung kejaringan local dengan domain pilih option Yes, lalu isi dengan nama DOMAIN yang sama dengan DOMAIN jaringan Kamu dan sebaliknya jika tidak terhubung kejaringan atau terhubung tapi tanpa DOMAIN pilih option No, sekali lagi tekan Next.
19. Selanjutnya Kamutinggal mengklik Ok,Next,Skip dan Finish juga diminta mengisikan nama kamu. hingga Kamu berada pada tampilan Dekstop Windows seperti ini. Sekarang Kamu tinggal menginstal driver hardware CPU Kamu.
How to Install Joomla 1.5
This tutorial quickly leads you through installing Joomla 1.5. It details both a local installation for testing (if you do not have a hosting account or have a slow internet connection) and a real web server installation.
Joomla is a complex series of PHP scripts that run on a web server. When you browse a Joomla site, these scripting are being generated on the fly and creating what you see on the pages of the site. The key words here are web server.
Running and Testing Joomla Without a Hosting Account
You cannot download Joomla and try to run it on your computer like an exe file. It has to have a web server, which means you need to have a hosting account. Sounds obvious, but I have had a couple of people if they needed windows XP to run Joomla!
Now, before we shell out our hard earned money for a hosting account, there is something else you can do first. You can actually run a web server on your local computer, in other words, your desktop or laptop. This is known as having a localhost. It may sound like I just contradicted myself from the previous paragraph, but not quite. You can’t "run" Joomla itself on your own computer, but you can install a localhost web server for it to "run on".
What you need to pull this off is some software that runs Apache, PHP and MySQL on your computer. These are the same software packages that power websites. There are two popular ones, WAMP (www.wampserver.com/en/index.php) and XAMPP (www.apachefriends.org/en/xampp.html) and they are both free (PGL license)
I am going to quickly run through setting up WAMP, not that this package is windows specific.
Download WAMP from the above link, and then install it. It will create a folder c:/wamp/www
Run WAMP, you should get a handy icon in your system tray:
You need the dial to be white to continue. Note if you run Skype, it interferes with WAMP and so you have to start WAMP without Skype running (and then start Skype if you need it)
Now open a browser and go to localhost (no "www")
You should see the following page:
If you are not seeing this then you should stop and figure out why. You have to get this page before you can proceed. The WAMP site has some helpful troubleshooting FAQ's and a forum.
You should see your folder called "Joomla" in the list of Your Projects. Click on that folder and you will get taken to that "website".
Installing a Joomla Site on a Hosting Account
So let's assume you either have a hosting account, or are going to get yourself one. There are some minimum requirements for Joomla to run, and they are slightly different for the different versions.
Here are the minimum requirements for Joomla 1.0
* PHP 4.2.x or above - www.php.net
* MySQL 3.23.x or above - www.mysql.com
* Apache 1.13.19 or above - www.apache.org
You must ensure that you have MySQL, XML and Zlib support built into your PHP.
help.joomla.org/content/view/34/132/
For Joomla 1.5 it’s recommended you have PHP 4.4.3 or above (for enhanced security).
A thread on the Joomla forums lists various hosting companies who are active Joomla community members. The list can be found at forum.joomla.org/index.php/topic,6856.0.html
Note that from now on, the steps are more or less the the same whether you are installing Joomla on a localhost or on a remote web server.
Getting the Joomla Files
This part is easy. Head on over to www.joomla.org and you will see a link to the download section on the home page, it looks like this:
The version number is the number given. This image shows that it's the 11th release in the 1.0 series.
Or you can head straight to the Forge and you will see all possible downloads:
forge.joomla.org/sf/frs/do/viewSummary/projects.joomla/frs
All versions are here as well as various upgrades from one release to another, important if you already have an installation of Joomla.
Important Note:
You cannot upgrade from Joomla 1.0 to Joomla 1.5. There are significant enough changes in the code that simply over writing files would break your site. The developer team has carefully chosen to talk about migration.
"Joomla 1.5 does not provide an upgrade path from earlier versions. Converting an older site to a Joomla 1.5 site requires creation of a new empty site using Joomla 1.5 and then populating the new site with the content from the old site. This migration of content is not a one-to-one process and involves conversions and modifications to the content dump."
dev.joomla.org/component/option,com_jd-wp/Itemid,33/p,107/
This has been a deliberate choice to minimize the number of users who might attempt the "overwrite the files" technique. More can be found in the forum:
"Joomla 1.5 is so significantly changed from 1.0 that there is no 'upgrade' path. This is the reason that we are providing a migration path. The concept is to build a new site and to migrate data from the old site. Extensions need to be installed and configured as if the site is new. The core data migration does reconstruct menu items for core elements and also keeps core module records with configuration settings."
David Gal - forum.joomla.org/index.php/topic,63232.0.html
Unzipping the files
You need to unzip, or unpack the big Joomla files you have onto your server. If you are running as a localhost, your server would be the WAMP directory mentioned above. If you are on a web host, you will need to upload the file and then unpack it. Perhaps the easiest way to do this is with cpanel. Almost all hosting companies provide it. Use your file manager to upload the zip file to public_html (or whatever you have on your host). You can then use file manager to extract the files.
Note:
I don’t recommend using Fantasico. Many hosts provide it but don’t always have the most current file releases.
Installing Joomla through a Web Browser
If you have got this far that means you have unzipped the Joomla package to either a remote web host or your local computer. Now for the fun stuff!
Using your browser of choice (Firefox of course), navigate to the location of all the localhost/Joomla. You will see the first installation screen.
Choose Language:
Here is the first look at some of the internationalization features of Joomla 1.5, you can select amongst many languages for the installation instructions.
Pre-Installation Check
A critical part in the installation process, this checks if all the minimum system requirements are met.
The first set are required minimums, if they are red (not met) then you need to find a new environment (change hosts), talk them into changing their environment (upgrading PHP for example). Note that the last item is a permissions issue on a file that is much easier to rectify. You can usually change permissions through the cpanel provided by your host. This tool is generally an industry standard.
The second set is recommended settings. If you don't meet them you can still install Joomla but it you experience problems with functionality and security.
Once you are green to go, click next.
License
Joomla is released under a GNU/GPL license. One of the most common questions regarding this license is “can I remove the footer link that says Powered by Joomla”. It’s actually perfectly OK to do this, you just have to keep the copyright statement in the source code. However, I would recommend that you keep the link.
Why?
Joomla is an open source project, it receives no funding from any kind of revenue from selling its software. The bottom line is that thousands of developers around the world are developing this software that you are using right now. If you had to buy it from a commercial company, it would cost tens of thousands of dollars, but you are getting it for free. In return, keep the link, it will help the project gain in popularity and grow. Don’t hide the fact that you are using Joomla, be proud of it! And don’t be concerned about any kind of SEO dilution with an extra link off your page. Links to authoritative sites actually help you SEO!
OK, I’ll get off my soapbox now…
Database Configuration
This is one of the main pages of the installation process, it’s where you need to enter important information about the database that your Joomla site will use. Note you will see a drop down for the database type. Joomla 1.5 only really runs on SQL, but some of the foundation has been laid for the next release, 2.0, to use more types, for example Oracle.
The hostname will almost always be “localhost”
The Username and password will have been provided by your hosting company, usually in an email you got when you created the account.
If you are installing on a localhost using WAMP or XAMPP, the Username is usually “root” and the password is nothing/blank.
Once you have entered this information, click Get Privileges and the Joomla installer checks to see if that user has rights to create a database. You should see this message:
If you made an error, or the user does not have sufficient permissions, then you get this message (after a small delay):
If the user you have does not have permissions then you can ask your hoster to pre-create a SQL database for you to use.
Available collations refer to various character sets available for different languages. When you click the button you get a list of what is available:
Pick a Database name for the SQL database that Joomla will use. Use some sort of name that is not confusing. Other scripts use SQL databases and before you know it you might have several on your server and will need to tell them apart. Don’t use spaces in the name.
If you are running several Joomla sites but only have access to one database, you will need to use a table prefix to distinguish them. You’ll need to enter the prefix in the advanced settings (below)
Note if your user did not have database creation privileges and you were provided with a database instead you would obviously put that in as the name.
The advanced settings are concerned with what content the site starts with and also the table prefixes mentioned above.
If you have an existing site and you are reinstalling over the top, you will need to select Drop Existing Tables. If you need to keep a back of them, select Backup Old Tables. Using “jos” as a table prefix is conventional unless you have multiple sites in the same database.
Main Configuration
The Main Configuration page determines how you will insert content into your site. You have three choices:
* Install Sample Data
This installs the default Joomla content that you have probably seen all over the web with “Welcome to Joomla”. Note that is also includes all the menus, navigation links and sections/categories. If you are learning how to use Joomla this is highly recommended. Its easier to adapt and revise than to start from scratch.
* Load SQL script
This is a SQL file that might have a customized set of content
* Migration from previous versions
This is a special function that is part of a process to migrate a Joomla site running on 1.0 to 1.5 and requires a special component to do so. This is discussed more in the Appendix.
Give your site a name (pay attention to SEO keywords) and then enter the super administration information. This will be the first user in the site and automatically gets that status. Note that if you don’t change the password, it will use the one shown on the left. Make sure you write it down!
Cross your eyes, close your fingers and click next. Hopefully you will see this screen
If you do get this result, you can investigate different language options, view the site or jump right to the administration of your site.
If you don’t get this page, then you have some work to do. Often issues arise because of server environments. If the solution is not obvious, a useful step is to copy the error message or the main part of it and then search for it both on the Joomla help forums, forum.joomla.org and in Google. The chances are if you get an error, someone else has before you.
Joomla is a complex series of PHP scripts that run on a web server. When you browse a Joomla site, these scripting are being generated on the fly and creating what you see on the pages of the site. The key words here are web server.
Running and Testing Joomla Without a Hosting Account
You cannot download Joomla and try to run it on your computer like an exe file. It has to have a web server, which means you need to have a hosting account. Sounds obvious, but I have had a couple of people if they needed windows XP to run Joomla!
Now, before we shell out our hard earned money for a hosting account, there is something else you can do first. You can actually run a web server on your local computer, in other words, your desktop or laptop. This is known as having a localhost. It may sound like I just contradicted myself from the previous paragraph, but not quite. You can’t "run" Joomla itself on your own computer, but you can install a localhost web server for it to "run on".
What you need to pull this off is some software that runs Apache, PHP and MySQL on your computer. These are the same software packages that power websites. There are two popular ones, WAMP (www.wampserver.com/en/index.php) and XAMPP (www.apachefriends.org/en/xampp.html) and they are both free (PGL license)
I am going to quickly run through setting up WAMP, not that this package is windows specific.
Download WAMP from the above link, and then install it. It will create a folder c:/wamp/www
Run WAMP, you should get a handy icon in your system tray:
You need the dial to be white to continue. Note if you run Skype, it interferes with WAMP and so you have to start WAMP without Skype running (and then start Skype if you need it)
Now open a browser and go to localhost (no "www")
You should see the following page:
If you are not seeing this then you should stop and figure out why. You have to get this page before you can proceed. The WAMP site has some helpful troubleshooting FAQ's and a forum.
You should see your folder called "Joomla" in the list of Your Projects. Click on that folder and you will get taken to that "website".
Installing a Joomla Site on a Hosting Account
So let's assume you either have a hosting account, or are going to get yourself one. There are some minimum requirements for Joomla to run, and they are slightly different for the different versions.
Here are the minimum requirements for Joomla 1.0
* PHP 4.2.x or above - www.php.net
* MySQL 3.23.x or above - www.mysql.com
* Apache 1.13.19 or above - www.apache.org
You must ensure that you have MySQL, XML and Zlib support built into your PHP.
help.joomla.org/content/view/34/132/
For Joomla 1.5 it’s recommended you have PHP 4.4.3 or above (for enhanced security).
A thread on the Joomla forums lists various hosting companies who are active Joomla community members. The list can be found at forum.joomla.org/index.php/topic,6856.0.html
Note that from now on, the steps are more or less the the same whether you are installing Joomla on a localhost or on a remote web server.
Getting the Joomla Files
This part is easy. Head on over to www.joomla.org and you will see a link to the download section on the home page, it looks like this:
The version number is the number given. This image shows that it's the 11th release in the 1.0 series.
Or you can head straight to the Forge and you will see all possible downloads:
forge.joomla.org/sf/frs/do/viewSummary/projects.joomla/frs
All versions are here as well as various upgrades from one release to another, important if you already have an installation of Joomla.
Important Note:
You cannot upgrade from Joomla 1.0 to Joomla 1.5. There are significant enough changes in the code that simply over writing files would break your site. The developer team has carefully chosen to talk about migration.
"Joomla 1.5 does not provide an upgrade path from earlier versions. Converting an older site to a Joomla 1.5 site requires creation of a new empty site using Joomla 1.5 and then populating the new site with the content from the old site. This migration of content is not a one-to-one process and involves conversions and modifications to the content dump."
dev.joomla.org/component/option,com_jd-wp/Itemid,33/p,107/
This has been a deliberate choice to minimize the number of users who might attempt the "overwrite the files" technique. More can be found in the forum:
"Joomla 1.5 is so significantly changed from 1.0 that there is no 'upgrade' path. This is the reason that we are providing a migration path. The concept is to build a new site and to migrate data from the old site. Extensions need to be installed and configured as if the site is new. The core data migration does reconstruct menu items for core elements and also keeps core module records with configuration settings."
David Gal - forum.joomla.org/index.php/topic,63232.0.html
Unzipping the files
You need to unzip, or unpack the big Joomla files you have onto your server. If you are running as a localhost, your server would be the WAMP directory mentioned above. If you are on a web host, you will need to upload the file and then unpack it. Perhaps the easiest way to do this is with cpanel. Almost all hosting companies provide it. Use your file manager to upload the zip file to public_html (or whatever you have on your host). You can then use file manager to extract the files.
Note:
I don’t recommend using Fantasico. Many hosts provide it but don’t always have the most current file releases.
Installing Joomla through a Web Browser
If you have got this far that means you have unzipped the Joomla package to either a remote web host or your local computer. Now for the fun stuff!
Using your browser of choice (Firefox of course), navigate to the location of all the localhost/Joomla. You will see the first installation screen.
Choose Language:
Here is the first look at some of the internationalization features of Joomla 1.5, you can select amongst many languages for the installation instructions.
Pre-Installation Check
A critical part in the installation process, this checks if all the minimum system requirements are met.
The first set are required minimums, if they are red (not met) then you need to find a new environment (change hosts), talk them into changing their environment (upgrading PHP for example). Note that the last item is a permissions issue on a file that is much easier to rectify. You can usually change permissions through the cpanel provided by your host. This tool is generally an industry standard.
The second set is recommended settings. If you don't meet them you can still install Joomla but it you experience problems with functionality and security.
Once you are green to go, click next.
License
Joomla is released under a GNU/GPL license. One of the most common questions regarding this license is “can I remove the footer link that says Powered by Joomla”. It’s actually perfectly OK to do this, you just have to keep the copyright statement in the source code. However, I would recommend that you keep the link.
Why?
Joomla is an open source project, it receives no funding from any kind of revenue from selling its software. The bottom line is that thousands of developers around the world are developing this software that you are using right now. If you had to buy it from a commercial company, it would cost tens of thousands of dollars, but you are getting it for free. In return, keep the link, it will help the project gain in popularity and grow. Don’t hide the fact that you are using Joomla, be proud of it! And don’t be concerned about any kind of SEO dilution with an extra link off your page. Links to authoritative sites actually help you SEO!
OK, I’ll get off my soapbox now…
Database Configuration
This is one of the main pages of the installation process, it’s where you need to enter important information about the database that your Joomla site will use. Note you will see a drop down for the database type. Joomla 1.5 only really runs on SQL, but some of the foundation has been laid for the next release, 2.0, to use more types, for example Oracle.
The hostname will almost always be “localhost”
The Username and password will have been provided by your hosting company, usually in an email you got when you created the account.
If you are installing on a localhost using WAMP or XAMPP, the Username is usually “root” and the password is nothing/blank.
Once you have entered this information, click Get Privileges and the Joomla installer checks to see if that user has rights to create a database. You should see this message:
If you made an error, or the user does not have sufficient permissions, then you get this message (after a small delay):
If the user you have does not have permissions then you can ask your hoster to pre-create a SQL database for you to use.
Available collations refer to various character sets available for different languages. When you click the button you get a list of what is available:
Pick a Database name for the SQL database that Joomla will use. Use some sort of name that is not confusing. Other scripts use SQL databases and before you know it you might have several on your server and will need to tell them apart. Don’t use spaces in the name.
If you are running several Joomla sites but only have access to one database, you will need to use a table prefix to distinguish them. You’ll need to enter the prefix in the advanced settings (below)
Note if your user did not have database creation privileges and you were provided with a database instead you would obviously put that in as the name.
The advanced settings are concerned with what content the site starts with and also the table prefixes mentioned above.
If you have an existing site and you are reinstalling over the top, you will need to select Drop Existing Tables. If you need to keep a back of them, select Backup Old Tables. Using “jos” as a table prefix is conventional unless you have multiple sites in the same database.
Main Configuration
The Main Configuration page determines how you will insert content into your site. You have three choices:
* Install Sample Data
This installs the default Joomla content that you have probably seen all over the web with “Welcome to Joomla”. Note that is also includes all the menus, navigation links and sections/categories. If you are learning how to use Joomla this is highly recommended. Its easier to adapt and revise than to start from scratch.
* Load SQL script
This is a SQL file that might have a customized set of content
* Migration from previous versions
This is a special function that is part of a process to migrate a Joomla site running on 1.0 to 1.5 and requires a special component to do so. This is discussed more in the Appendix.
Give your site a name (pay attention to SEO keywords) and then enter the super administration information. This will be the first user in the site and automatically gets that status. Note that if you don’t change the password, it will use the one shown on the left. Make sure you write it down!
Cross your eyes, close your fingers and click next. Hopefully you will see this screen
If you do get this result, you can investigate different language options, view the site or jump right to the administration of your site.
If you don’t get this page, then you have some work to do. Often issues arise because of server environments. If the solution is not obvious, a useful step is to copy the error message or the main part of it and then search for it both on the Joomla help forums, forum.joomla.org and in Google. The chances are if you get an error, someone else has before you.
how to make program c++ 1
1. Get a compiler and/or IDE. Two good choices are GCC, or if your computer is running Windows, Visual Studio Express Edition.
Ads by Google
Flowcharts from C/C++
Understand code in less time code-formatting, cross-reference
www.sgvsarc.com
2.
2
Some Examples (Copy and Paste this into a text/code editor)
A simple program is given by Bjarne Stroustrup (developer of C++) to check your compiler:
#include
#include
using namespace std;
int main ()
{
string s;
cout << "jhun \n" ;
cin >> s;
cout << "Hello, " << s << '\n' ;
return 0; // this return statement isn't necessary
}
// The sum of two numbers.
#include
using namespace std;
int main ()
{
int no1, no2, sum ;
cout << "\nEnter the first number = " ;
cin >> no1 ;
cout << "\nEnter the second number = " ;
cin >> no2 ;
sum = no1 + no2 ;
cout << "\nThe sum of "<< no1 <<" and "<< no2 <<" = "<< sum '\n' ;
return 0 ;
}
3.
3
Save this as sum.cpp, Don't confuse there are many other extensions for C++ files, choose any of them (like *.cc, *.cxx, *.c++, *.cp) .
HINT : It should say Save as Type: {select "All Files"}
4.
4
Compile it.
For users of linux and gcc compiler
Command : g++ sum.cpp
Users of Window can use any C++ compiler
Like MS Visual C++ or any they like to use
5.
5
Run the program
For users of Linux and gcc compiler
Command : ./a.out (a.out is a executable file produce by compiler after compilation of program.)
Ads by Google
C++ Database
High Scalability, High Availability Large Data Sets, High Performance
www.versant.com/objectdatabase
Java Upstream Tracker
backward compatibility testing for Java libraries
linuxtesting.org
edit Tips
* For more details about programming in C++ give a visit cplusplus.com
* cin.ignore() prevents the program from ending prematurely and closing the window immediately (before you have time to see it)! Press any key if you want to end the program. cin.get() functions in a similar manner.
* Add // before all of your comments.
* Learn programming in C++ with ISO standards
* Feel free to experiment!
Ads by Google
Flowcharts from C/C++
Understand code in less time code-formatting, cross-reference
www.sgvsarc.com
2.
2
Some Examples (Copy and Paste this into a text/code editor)
A simple program is given by Bjarne Stroustrup (developer of C++) to check your compiler:
#include
#include
using namespace std;
int main ()
{
string s;
cout << "jhun \n" ;
cin >> s;
cout << "Hello, " << s << '\n' ;
return 0; // this return statement isn't necessary
}
// The sum of two numbers.
#include
using namespace std;
int main ()
{
int no1, no2, sum ;
cout << "\nEnter the first number = " ;
cin >> no1 ;
cout << "\nEnter the second number = " ;
cin >> no2 ;
sum = no1 + no2 ;
cout << "\nThe sum of "<< no1 <<" and "<< no2 <<" = "<< sum '\n' ;
return 0 ;
}
3.
3
Save this as sum.cpp, Don't confuse there are many other extensions for C++ files, choose any of them (like *.cc, *.cxx, *.c++, *.cp) .
HINT : It should say Save as Type: {select "All Files"}
4.
4
Compile it.
For users of linux and gcc compiler
Command : g++ sum.cpp
Users of Window can use any C++ compiler
Like MS Visual C++ or any they like to use
5.
5
Run the program
For users of Linux and gcc compiler
Command : ./a.out (a.out is a executable file produce by compiler after compilation of program.)
Ads by Google
C++ Database
High Scalability, High Availability Large Data Sets, High Performance
www.versant.com/objectdatabase
Java Upstream Tracker
backward compatibility testing for Java libraries
linuxtesting.org
edit Tips
* For more details about programming in C++ give a visit cplusplus.com
* cin.ignore() prevents the program from ending prematurely and closing the window immediately (before you have time to see it)! Press any key if you want to end the program. cin.get() functions in a similar manner.
* Add // before all of your comments.
* Learn programming in C++ with ISO standards
* Feel free to experiment!
Langganan:
Postingan (Atom)